Police Vehicle Windshield Post Spotlight Hole Patch Cover 2 ea

Description: Looking for an economical solution to conceal the ugly spotlight holes in the windshield post of your former police cruiser? Check this out! 2 pc (two each) or 24 pc of NennoPro™ Made in U.S.A. pressure sensitive adhesive spotlight hole concealment patch cover(s).This product is manufactured with automotive grade urethane and has a strong industrial 3M™ PSA backing for peel and stick installation (50 degrees is the minimum installation temperature and installer must follow all instructions). New stronger industrial adhesive as of September 2020. This molded patch is designed and shaped to cover the left or right spotlight hole in a vehicle windshield post with a margin of overlap. It is ideal for vehicles that had the spotlight removed leaving the hole where the main shaft goes through the post and the two screws that hold the mount in place. This patch has a very smooth sleek low profile appearance. It is not intended for interior applications inside a vehicle. Patch Dimensions: 3-11/16” by 1-1/2" x 0.060” thick Color: Gloss White, or Gloss Black, blends nicely into white body panels with a stealthy look and can be painted to match using automotive finishing products and procedures.Fits the following vehicles: Dodge Charger 2006-2023*Chevrolet Impala 2006-2016Caprice 2011-2017Tahoe/Silverado/Suburban 2015-2020Tahoe/Sliverado/Suburban 2006 and earlier older body with windshield post mounted lamp only.Application Note: Not for use on vehicles with notched out door frames such as the 2007-2014 Tahoe, and Ford Crown Victoria. Also not for use on Ford Explorer or Expedition, or the narrow windshield post of Ford Taurus Interceptor Sedan. See our other listings for the correct patch solution for the 2013-2019 Taurus, 2013-2019 Explorer, Dodge Durango, 2021-2023 Tahoe. For other possible applications, check the patch dimensions for verification of coverage allowing for some overlap beyond all 3 holes on your particular vehicle. Installation: Surface temperature of the vehicle must be between 50 and 80 degrees F. Clean all metal burrs, wax, spent residue, RTV silicone and any other foreign substances around the hole to be covered. Carefully peel the backing off the patch and center over your hole pressing down around the outer edges only. Try to get it in the exact spot you need the first time, the adhesive is very strong and it will damage the adhesive if pulled off during install. Avoid "touch" type car washes for 24 hours. Detailed instructions and final alcohol prep pad are included. *The Dodge Charger spotlight is attached to the windshield post with two threaded nut inserts. These inserts must be drilled flush with the outer post surface before cleaning the area. Thanks for looking!NennoguyNenno Products LLC

Price: 129.95 USD

Location: Allenton, Wisconsin

End Time: 2023-09-18T17:39:47.000Z

Shipping Cost: N/A USD