Description: O Scale Sanding Tower Kit - UNASSEMBLED - UN PAINTED. This kit includes all parts needed to construct a sanding tower in O scale. See picture of kit contents. Framework structure is laser cut from 1/16" plywood. Tank; fittings; and valves are 3D printed on a resin printer. Kit will include everything pictured (see last picture); styrene tubing; hose; fittings and 3D printed cement footings. Kit will have plenty of brass rod to make your own ladder and handrail. I will not include instructions. I assume you have some modeling skills and can figure this simple one out without too much support. The handrail will need to be soldered. I will include a paper layout for the handrail you can use as a template. Overall height is 11.25"; square width as the bottom is just under 2". You can cut the arms to whatever length you like. 3D resin printed parts have to be supported during printing. So there is always a bad side; in this case I made the bottom of the tank have the small divots. You can fill yours in with spot putty and sand; or leave as these will be below the visual level on a typical layout. I travel for my real job so shipment can take 5-6 days sometimes.
Price: 72 USD
Location: Cypress, Texas
End Time: 2024-08-05T18:23:26.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Return policy details:
Brand: Unbranded
Type: Sanding Tower
Gauge: O
