“Matte Black” Tesla Cybertruck 2024 Paint Protection Film PreCut Kit PPF

Description: The product is a pre-cut paint protection film kit designed for the Tesla Cybertruck 2024. It covers the entire car and is made of clear polyurethane material that is UV-resistant and washable. The film is computer cut and easy to install. The kit includes pieces for the bumper, front-end, hood, tailgate, and both sides of the front. Function -Protect the original paint from scratches. -Water-resistant, easy to be cleaned with water and soap. -Removable, will not harm the car paint. Installation ### Installation Instructions for a Pre-Cut DIY PPF Kit for Tesla Cybertruck **Materials Needed:** - Pre-cut PPF kit (Paint Protection Film) - Microfiber towels - Squeegee or application tool - Spray bottle with a mixture of water and a few drops of dish soap (for lubrication) - Heat gun or hairdryer - Isopropyl alcohol or automotive cleaner - Clean, lint-free cloths - Optional: Plastic trim removal tools **Preparation:** 1. **Clean the Vehicle:** - Wash your Tesla Cybertruck thoroughly with car soap and water. - Ensure the surface is free of dirt, dust, and any other contaminants. - Dry the vehicle completely with a clean microfiber towel. 2. **Clean the Installation Area:** - Wipe down the specific area where you will be applying the PPF with isopropyl alcohol or automotive cleaner. - This will ensure no residues or oils interfere with the film's adhesion. **Application:** 1. **Position the Pre-Cut Film:** - Unroll the pre-cut PPF pieces on a clean, flat surface. - Identify each piece based on the installation instructions that came with your kit. Typically, the pieces are labeled for specific areas of the vehicle. 2. **Apply the Film to the Vehicle:** - **Spray the Surface:** - Lightly spray the area of the vehicle where you will be applying the film with the soapy water mixture. This will help you reposition the film if necessary. - **Peel and Position the Film:** - Gently peel the backing off the pre-cut PPF piece, taking care not to let the adhesive side touch anything. - Carefully place the film onto the vehicle surface. Align it according to the edges of the area it’s meant to cover. 3. **Squeegee the Film:** - Use a squeegee or application tool to gently press the film onto the vehicle. Start from the center and work your way outwards to remove any air bubbles and excess water. - Be gentle to avoid stretching or damaging the film. 4. **Heat and Shape the Film:** - Use a heat gun or hairdryer to apply mild heat to the film. This will make the film more pliable and help it conform to the vehicle’s curves and edges. - Gently stretch and mold the film as needed to fit the contours of the vehicle. Avoid overheating, as it can cause damage to the film. 5. **Trim and Final Adjustments:** - Use a sharp blade or utility knife to trim any excess film along the edges for a precise fit. Be careful not to scratch the vehicle’s paint. - Smooth out any remaining bubbles or wrinkles with the squeegee. 6. **Final Cleaning:** - Wipe down the edges and surrounding areas with a clean microfiber cloth to remove any soapy residue and ensure a clean finish. **Post-Installation Care:** 1. **Allow the Film to Set:** - Let the PPF set for at least 24 hours without exposure to water or harsh conditions. This allows the adhesive to fully bond with the vehicle’s surface. 2. **Avoid Washing the Vehicle:** - Do not wash the vehicle for at least 48 hours after installation. This prevents the film from being disturbed during the curing process. 3. **Regular Maintenance:** - Clean the PPF with a mild car soap and water solution. Avoid abrasive cleaners or tools that might damage the film. - Regularly check the edges of the film to ensure they are secure and free of debris. **Tips:** - **Work in a Clean Environment:** Ensure that you are working in a dust-free environment to avoid debris getting trapped under the film. - **Be Patient:** Take your time with each step, especially during the alignment and squeegeeing process. - **Seek Assistance:** If you find it challenging to apply the film on your own, consider enlisting the help of a friend or a professional installer. By following these detailed instructions, you should be able to successfully apply your pre-cut PPF kit to your Tesla Cybertruck and protect it from damage.

Price: 1074.22 USD

Location: West Columbia, South Carolina

End Time: 2024-08-25T20:09:36.000Z

Shipping Cost: 49.95 USD