Flange Flex Coupling Exhaust Repair Pipe for Ford Mercury Pontiac Chevy Saturn

Description: BRC102FF Flange Flex Coupling Exhaust Repair Pipe for Ford Mercury Pontiac Chevy Saturn 3.0 L. Applications: Chevrolet Malibu 3.5L '08-'10 (Front Left Flex Pipe Only)Chevrolet Malibu 3.9L '06-'07 (Front Left Flex Pipe Only)Ford Taurus 3.0L '00-'05 (8th VIN# S)Ford Taurus 3.0L '00-'07 (8th VIN# U)Ford Taurus 3.0L '00-'06 (8th VIN# 2)Mercury Sable 3.0L '00-'05 (8th VIN# S or U)Mercury Sable 3.0L '01-'05 (8th VIN# 2)Pontiac G6 3.5L ‘07-’10 (Front Left Flex Pipe Only)Pontiac G6 3.9L '06-'07 (Front Left Flex Pipe Only)Saturn Aura 3.5L '07-'08 (Front Left Flex Pipe Only)Saturn Aura 3.6L ‘07-’09 (Front Left Flex Pipe Only)Semi-Direct Fit Flange Flex Repair KitOutlet MUST be Welded, NOT ClampedIncludes Gasket & HardwareLifetime Warranty* Regarding 2007-2008 3.5L Malibu and G6 models:We have had reports of the BRC102FF not being able to properly seal to the OEM flange if the outside edge is too corroded. In these situations, you have 2 options on how to proceed. 1) Along with the purchase of the BRC102FF, also purchase and replace the OEM flange with part# FX07 flange, as it will mate up to BRC102FF perfectly. Problem with this solution is the FX07 flange has an ID of 2.25", so you may also need to purchase pipe adapter# ROL200ID225OD to bring the ID down to 2" and slide over your existing pipe. Pipe adapter may also need to be trimmed down in length to fit. 2) Do not purchase BRC102FF. Instead purchase BRC107FF, which has a smaller ID on the flange side and will seal up to your existing OEM flange nicely. Problem with this solution is that the bolt hole spacing on BRC107FF is slightly too narrow to mate up to your OEM flange, so this solution only works if you have the ability to widen the bolt hole spacing. Also the outlet side is only 1.75" ID, so it will likely have to slide inside your OEM pipe rather than over it. DISCLAIMER!!We cannot be responsible for improper fitment. Please read the description carefully to make sure that this flange flex repair will fit your vehicle.Being that this is a semi-direct fit kit, modifications may be required to achieve fitment on some applications. These modifications may include, but are not limited to: reducing or expanding pipe size, cutting pipe to length, welding, and/or purchasing additional parts.For this reason, installation by an experienced muffler shop is highly recommended and Bear River Converters is not responsible for any additional charges that may occur. Dimensions: Visible Flex Braid Length: 2.71875" (2 23/32”)Outlet Length: .65625" (21/32")OAL: 5.15625" (5 5/32”)Outlet ID: 2.03125” (2 1/32")Outlet OD: 2.125" (2 1/8")Flange Thickness: .3125" (5/16”)Bolt Hole Center to Center: 3.875" (3 7/8”) (Slotted Style, will fit 3.375" (3 3/8") - 4.375" (4 3/8"))Flange Material: Carbon SteelFlex Material: T304 Stainless SteelPipe Material: T409 Stainless SteelWeight: 2 lbs. WarrantyWe are so confident in the quality of our repair kits, that we offer a guarantee that our repair kits will not fail due to corrosion, cracking, or splitting for the lifetime of the vehicle. This warranty does not cover damage that may be the result of improper use, including, but not limited to: road damage, overheating, missing hangers, broken motor mounts, etc. If for any reason our repair kit fails under normal use, we will replace it free of charge. Your original invoice and picture of the failed repair kit while still installed will be required for warranty. Our warranty does not cover shipping, labor costs or other installation costs. It also does not cover any incidental or consequential damages. IF YOU HAVE ANY QUESTIONS REGARDING THIS LISTING, PLEASE USE THE CONTACT SELLER LINK. _gsrx_vers_566 (GS 6.7.1 (566))

Price: 24.99 USD

Location: Riverton, Utah

End Time: 2024-08-01T21:10:07.000Z

Shipping Cost: N/A USD