360 Degree Continuous Rotation Digital Servo for Arduino Smart Car Robot RC DIY

Description: Feetech FT90R 360 Degree Continuous Rotation Digital Servo Feetech FT90R for Arduino Smart Car Robot RC Drone Airplane Model Feature The FT90R is a micro-sized digital servo continuous rotation. At 6 V, it has a maximum rotation speed of around 170 RPM (no-load) and can produce up to 21 oz-in (1.5 kg-cm) of torque. The servo can be controlled using a direct connection to a single microcontroller I/O line without any additional electronics, which makes it a great miniature actuator for beginner robotics projects; just throw on a pair of wheels and your robot is ready to roll! The FT90R continuous rotation servo converts standard RC servo position pulses into continuous rotation speed. The rest point is set precisely to 1.5 ms with a deadband width of ±20 µs. Pulse widths above the rest point result in counterclockwise rotation, with speed increasing as the pulse width increases; pulse widths below the rest point result in clockwise rotation, with speed increasing as the pulse width decreases. Product Description SKU:FT90R Size: 22.9*12.1*26.5mm Weight:9g Gear type: Plastic Gear Limit angle: 360° Bearing: NO Ball bearings Horn gear spline: 20T Horn type: Plastic,POM Case: ABS Connector wire: 250mm ±5 mm JR Motor: Metal brush motor Operating Voltage Range: 4.8-6V Idle current(at stopped):5mA-6mA No load speed: 130RPM@6V Runnig current(at no load) : 900mA @6V Peak stall torque: 1.5kg.cm@6V Rated torque: 0.5kg.cm@6V Stall current: 900mA@6V Rotating direction:CW (1500~ 1000 μsec) , CCW (1500~ 2000 usec)

Price: 7.27 USD

Location: Shenzhen

End Time: 2024-11-23T11:11:54.000Z

Shipping Cost: 0 USD